Is rooting LG G3 or not?

All this leads us to the question of legality. Rooting is actually overcoming of some technological protections, so it falls under the laws that talk about circumventing of digital locks. Many countries don´t have such a law, some have laws about Digital Rights Management, but most of them except rooting. For example, some countries forbid similar procedures, except in the cases of software inoperability (and rooting may be classified in that category). That is the case in Canada, United Kingdom, India, New Zealand, Singapore and United States. In Australia is unclear is it legal or not, since there is no law that may cover this area. European Union allows it, and the manufacturer may void warranty of a rooted device only if he proves that this procedure harmed the device.

Once you rooted LG G3, in some moment, you may choose to unroot it, to turn it back on original settings. You may need to use your warranty, or you want to receive some OTA updates on your LG G3. Then you may unroot your device, do what you have to and then root it again.

To Root or not to Root?

When we put it all together, there are a few conclusions that are evident. First, learning how to root LG G3 is not complicated and practically everyone with the basic technological knowledge may do it with proper software and following simple instructions. On the other hand, this procedure will bring real benefits only to owners that have some knowledge about Android technology. It may help to everybody, but most procedures you may perform only on rooted device are not recommended to the beginners.

So, if you choose to root your LG G3 or any other Android device, make sure you know what you are getting into. If you don´t have a needed expertise, then find someone who has and let them show you what can you do with your device. In that case you may enjoy in improved device.

Samsung Galaxy S3 is the brand’s answer to Galaxy S4 and HTC One. Although it’s a large phone, it’s not unwieldy, unlike the other two units. It’s packed with more features than you can handle. You can’t go wrong with this phone.

Despite its jam-packed features, you can’t still have full control over it. Your carrier and Samsung have placed restrictions to your phone so you can use it with limits.

But you don’t have to suffer such limitations. You can gain admin rights to your phone. It’s just like having administrative rights to your computer. With those rights, you can tinker your phone and customize it in any way you can.

Thanks to “hackers” or developers who worked hard to help Samsung Galaxy S3 owners root their phones.

In this guide, we’ll tackle how to root Samsung Galaxy S3 in the easiest possible way. It’s easy because even your mother, who’s non-techie, can perform the task.

  1. Open your computer and download the necessary USB drivers for your phone. The drivers come with your device. If you lost it, you could get them from the official website of Samsung.
  2. Get your Samsung Galaxy S3 and go to its Settings menu. Then, tap General and touch About Phone. Among the options provided, tap the Software information. It’s just below the Hardware information or above Legal information.
  3. Tap the Build Number option many times until your phone shows you this message: “You are now a developer.” The message will appear below the screen, so you might miss that.
  4. Go back to the Settings menu and tap General. Touch the Develop Options. Under Debugging, check the box next to USB debugging. You must check this option so your phone can communicate with your computer.
  5. Open your computer’s browser and look for a root toolkit designed for Samsung Galaxy S3. You may use VRoot or IORoot. These two options are the most popular ones to get the job done fast.
  6. Download the toolkit to your computer. Extract it after it has been completely downloaded.
  7. Run the rooting tool you just downloaded. The instructions will appear to help you root Galaxy S3. You just need to follow them.
  8. Unplug your phone from your computer when prompted. On your handset, toggle the USB Debugging off and turn it on again. After that, plug it back to your computer.
  9. Wait for the program to complete the rooting process. The program will tell you about what has been done. When the process is done, it will tell you that it has successfully rooted your phone.
  10. Go to your apps menu and look for the SuperUser app icon. This app indicates that you now have a rooted Samsung Galaxy S3. You can try it out by going to Google Play Store and install Titanium Backup. It’s a free app that lets you make a backup copy of your entire device, not just some files. If you could download and install it, this means that your phone is rooted as Titanium Backup requires administrative rights.

Congratulations! You can maximize the potential of your phone and have full control over it.

As always, make sure that you know that all G2 models are supported, including the ones from AT&T, Sprint, Verizon, T-Mobile and Vodafone. Also, all Android versions are rootable, including the Jelly Bean (4.3 – 4.3.3) and Kitkat (4.4, 4.4.2, 4.4.3 and 4.4.4).

What can you do with your rooted Samsung Galaxy S3?

  1. Delete unwanted apps. This is one of the main reasons people root their Samsung Galaxy S3 and other Android devices. Not just apps, but games too can be removed when you have gained root access to your mobile. These apps and games were installed by your carrier and/or Samsung. You can’t remove them, unless your phone is rooted.
  2. Free up some space. Since you can now delete those apps you’ve never used, you can free up significant amount of storage space for apps that you use.
  3. Enable faster updates. Instead of waiting for Google to release updates, you can get them in short order. In a way, this could add years to the life of your Samsung Galaxy S3.
  4. Make complete backups. And it’s not just some of the apps but all of them stored in your phone. Then, you can also backup your phone logs, SMS, etc.
  5. Extend battery life. This means you need to underclock your phone or install a program that can do the trick.

As long as you follow our instructions on how to root Samsung Galaxy S3 properly, you won’t face risks of bricking your phone or voiding your phone’s warranty.

Samsung Galaxy S5 is a powerful phone. It runs on Android OS, which is an open-source mobile operating system.

Despite its powerful features, this mobile has limitations. As you get used to it, you would come across some features that you would like to have or apps that you wanted to install.

Just like iOS, Android can be tinkered. By tinkering, it means gaining root access to your phone. It is like having the ultimate security clearance.

When you are ready to root Samsung Galaxy S5, you just need to follow this guide presented below. But be aware that rooting may void your warranty. And if you don’t follow the steps properly, you could damage your own phone.

If you still wanted to do this, let’s us start now.

  1. Back up your device. This is essential, especially if you have data on your device that you don’t want to lose. You may transfer them to your computer or install an app that can make a backup copy of your mobile data.
  2. Connect your phone using the USB cable that came with it. It’s not advisable to use any cable, even though it fits.
  3. Install the root toolkit. It’s an app that allows you to root not just Samsung Galaxy S5 but also other Nexus-branded devices.
  4. Set your phone as your device. That is, click your phone’s model type – Samsung Galaxy S5 – on the “Your model type” section.
  5. Click the Launch button found in the Advanced utilities part of that toolkit window. Look for “Launch CMD…” button and click it.
  6. Type this command in the command window: adb start-server. After completing it, close it and go back to the toolkit’s window.
  7. Go to your phone and open its Settings menu. Tap the “Developer options.” Make sure that you check the box next to “USB Debugging” option.
  8. Click the “Full Driver…” option button found at the top-right portion of the root toolkit window. You won’t miss it as it’s displayed prominently on the window’s page. You may install things manually or automatically. The latter is recommended if you don’t want to have lengthy procedures. The goal of this option is to install necessary drivers so that your phone can communicate directly to the root toolkit.
  9. Unlock your phone’s boot loader. It’s a type of program that tells the device how to load its OS. This works the same way as your Windows PC. For this purpose, you won’t need it. Thus, you need to click the Unlock button found in the root toolkit’s window. This will instruct your phone to start via Unlock boot loader. Tap “yes.” Your phone will restart a few times.
  10. Enable USB debugging mode again (refer to Step 7).
  11. Click the button that says “Root.” It’ll place the SuperSU app to your phone. Each time you install an app that requires root permissions, this app will show up asking you if you grant the app to have root permissions. You may deny or grant it.
  12. Open and run the SuperSU app to complete the Galaxy S5 Root.
  13. Restart your phone.
  14. Start installing apps for your rooted phone.

These steps will root Samsung Galaxy S5 and allow you to get the most out of your phone running on Jelly Bean (4.3-4.3.3) or Kitkat (4.4 – 4.4.2)

So that’s it. You’re all done. Keep in mind that all carriers are rootable, including Verizon, Sprint, AT&T, T-Mobile and Vodafone. The toolkit above will work for all Windows and Mac / Linux computers as well. It will also work on Samsung Galaxy S5 devices from 2012 or 2013. On the other hand, if you want to unroot your device, you simply have to use the root toolkit to unroot your phone.

Benefits of rooting Samsung Galaxy S5

  1. Control your device. Whoever is your carrier, there’s an app that they put on your phone. It may seem useful but it’s really not. You won’t use it. Those apps inserted by your carrier or Samsung can’t be uninstalled. With a rooted device, however, you can get rid of them easily.
  2. Backup. Although you can backup your unrooted device, not all files can be copied to your laptop, SD card, etc. Through a certain app, you can backup and restore almost everything on your device, including system files.
  3. Block ads. Ads can be annoying sometimes when you play a game on your phone or browse the Internet. But you can block them using a certain app.

Surely, rooting your Samsung Galaxy S5 offers great benefits. Although the entire process comes with risks, you can make the most of your device when you root it.

A guide to understanding how to get root permissions on the Samsung Galaxy S6. If you are owner of this new smartphone from Samsung, you will be interested to know how to get root permissions for this device. Despite the active control Knox, (the counter security that watches your system), those of you 4 who are impatient can now get root permissions for the Samsung Galaxy S6.

At the moment, you can then “unlock” your phone (phablet) to further customize it, but remember, this can result in loss of warranty on your terminal. As usual, we at telephoneline, we assume no liability for any malfunctions during or after the procedure. Proceed at your own risk being aware of the operations carried out.

The Samsung Galaxy S6

The smartphone was released this April, and presented himself as a new alternative to its older brother the S5 smartphone. A few months ago the house put it on the market at a price, which according to many, did not

correspond at all to the real capacity of the phone. After a few months in fact, the same has seen a drastic drop in the price, bringing down the cost to current prices less than 300 €.

How to root

As with several other devices, including this new terminal, you can get root permissions, and possibly also download and install a custom ROM. For now, let’s focus on what this guide is about, namely getting root privileges for the system, which was as usual provided by the talented developers at XDA. The system used for the root is what we’ve seen on other Samsung handsets. Through the use of Odin we are going to install the CF Auto root.

Requirements for the root

Unlock the links of requirements
Unlock the content download requirements with a “like” or by following us on Twitter.
Or if you don’t want to do that, you can download the files.

Guide to the root

So now you’re able to root Samsung Galaxy S6. Finally!

– Extract the ZIP package to CF Auto root file .tar.md5 and place it in a folder to which you have easy access.
– Run the program Odin 3:09 privileges administrator.
– Turn off the USB debugging mode and turn it back into download mode (by holding down the volume down + home button and then press power button) Now you should see a sign “Warning”. Use the volume up key to enter the download mode.
– Now connect the smartphone via USB cable to your PC, you should see the port ID: COM change color (as shown opposite), and in the box under the heading “Added”.
– Once the smartphone has been approved, you can click on the “AP” (PDA) and then select the file .tar.md5 extracted earlier.
– Once added, make sure that sprouted among the options are selected only “Auto Reboot” and “F. Reset Time “. Now start the root by clicking on “Start” and wait for it to end.

Congratulations! You have just rooted your Galaxy S6 . Soon, we will see how to install the Custom Recovery, which is necessary for the installation of custom ROMs and other tweaks.

Galaxy S6 is definitely the most difficult device to root, so with that being said, prepare for some information overload, and technical nerdism terms!

  1.  Install the Android SDK

The first step has nothing to do directly with your Samsung. If you want to install the Android SDK.

  1. Allow ADB Access

Once the SDK is installed on your computer, navigate to the folder in Android [your username].

Edit the file adb_usb.ini, adding the following line of code at the end:

0 × 1949

Close and save the file.

Now find the folder where the SDK is installed, and open the Google-USB_Driver folder. In this folder, find the file and add android_winusb.inf the following codes in sections [Google.NTx86] and [Google.NTamd64]:

% =% SingleAdbInterface USB_Install, USB \ VID_1949 & PID_0006

% =% CompositeAdbInterface USB_Install, USB \ VID_1949 & PID_0006 & MI_01

Now you can close and save the file.

  1. Root

Next, connect your Galaxy S6 to the USB port of your PC.

Now do all Root Prerequisites for Samsung Galaxy s6 first.

Go to Device Manager (Windows) in “Other devices” and choose the file android_winusb.inf.

Now on your Samsung, tap the settings icon in the status bar. Then choose “More” option, then “device”, and finally check the box that allows the addition of unknown sources.

Run the tool and select “root” option.

  1. Install the Android Market and Google Apps

Now what to do?

Download this zip file Google Apps. Must decompress (using WinRAR) and transfer them to your S6 via the USB port.

Then you have to buy root explore in the Amazon AppStore. It’s free on other market.

GoogleServicesFramework.apk select and install it. After that, restart.

Now that root explorer is open, find the file for the market (Vending.apk).

Change the option in root explore RO (Read Only) to RW (Read Write).

Long press on Vending.apk, choose “Move” and navigate to the folder system / app on your kindle. This moves the file system market in the apps folder.

Long press on Vending.apk again (in a new location) and choose “Permissions”. Change the permissions for other applications in this folder.

Finally, click on Vending.apk and install it. You can now restart your kindle is Roote.

  1. Enjoy

You can now open the market and install all full of good things.

Sorry for the mistakes, but it is a translation to go fast.

The Galaxy S6 is the latest Samsung phablet and part of the line “S” is associated with the idea of constant expansion. Improving its predecessor in almost every way, the device is a very powerful machine and a wonderful productivity tool. . The Galaxy S6 root has been possible for some time, however, this would result in KNOX Samsung.

Now, thanks to a clever work of recognized XDA developer designers along with the help of Elite Recognized Developer Chainfire and an “anonymous source”, which provided “some hook ups” that have managed mode root de la Vega. With this package, you can root the stock firmware and revert to a previous firmware without activating the Knox flags.

Root of the Vega, which was named after AT & T Mobility CEO Ralph de la Vega, was originally designed for the AT & T variant of the device. Now, however, this works for Active versions. Senior Member kal87 reported that this also works with Verizon variants. Unlike the first method shown CF-Root, Root of Vega Knox maintains the counter to 0 × 0, so that your operator or Samsung will not know that the Galaxy S6 has been changed before.

Check your AP and checking CSC since Dialer * # 1234 # and based on this, download your AP and CSC, If not on the list, wait until it is released to avoid bricking the device.

DOWNLOADS:ODIN v3.09 (Odin comes within the root of the zip near the root)
Root of

Look for your AP and download the file (tar) on the site as well. Now do 1 more thing: See the following requirements before starting the root process.


STEP 1: If you have an external SDcard we remove the mobile.

STEP 2: Go to Download Mode. Turn off the phone, disconnect the cable from the PC and put back the battery. Press and hold the Vol down + home + power button and follow the instructions.

STEP 3: Open Odin v3.09, select the correct file and introduce AP AP box in Odin. Do the same with the CSC file and place it in the box CSC Odin.
. Wait for it to restart again after a flash.

STEP 5: Copy the contents of to the root of the internal memory.

/ My Computer / [Phone Name] / Phone /
root_files (folder)

STEP 6: Restart. (very important). After booting completely delete the files from the internal memory that were added previously.

/ My Computer / [Phone Name] / Phone /
root_files (folder)

STEP 7: Reset. (extremely important) has started . Once done, reinsert the external SD card (if you have one) .That’s all. Enjoy the rooted Galaxy S6. Good Luck.

This basic guide is no different than any other Galaxy S6 root, but you need to download another software package. From Odin, you’ll need to use the Odin3 version 1.85. For the appropriate root firmware you first need to know which version of the Galaxy S6 you are running on. Navigate to the settings on the phone info tab and scroll down to the build number. The combination of letters and numbers after the dot is important so that you download the correct CF-kernel. Then navigate to the XDA thread in and look at the bottom posts by Chainfire to see the download entries that corresponds to your build number. For the build number IML74K.XX <§§B> LPQ <§§B> You need the file CF-Root-SGS6_XX_XEO_ <§§B> LPQ <§§B> Download the appropriate kernel and unpack the zip archive only once, so you will get a file with the extension: .tar.

Download now from the Samsung website under the appropriate software version tab and select the correct one and then install it via the USB drivers of your Galaxy S6.

Now check this prerequisites guide for Galaxy S6 to see if you’re ready to get root access.

Now start Odin and press the PDA button. Select the downloaded tar file and make sure that the checkbox re-partition is not active. Now move it down and restart it by holding down the hotkey [Lower] + [Home] + [Power] until the S6 switches to the download mode. Confirm the security prompt with [Loud]. Now you can connect your phone via USB cable to the computer. If everything worked, the entry ID lights: COM upper left yellow. Click Start, so Odin starts with importing the kernel.


Disconnect the connection to the PC until the boot process is complete and the PIN prompt will appear!

After the successful flash process the message PASS appears in the Odin window. From now on your Galaxy S6 is rooted!

To reset the device, an USB Jig is required. This hardware tool is available for four to ten USD on Amazon or Ebay.

Custom Binary Counter Reset:
In the first place please download the original bootloader file. Here you must flash an older bootloader, because Samsung has made it impossible for newer versions, the Custom Binary Counter to reset. Then you load the appropriate firmware for your SGS6 down.

Download Mode:

Now you need to put your Galaxy S6 in download mode. This is done as explained  in the rooting tutorial via holding down the key combination [Lower] + [Home] + [Power]. The security question you answer by pressing the [Volume].

Subsequently, you can also start Odin and connect it via USB to the computer. In the Odin window you should now see ID: COM light yellow. Extract the boot loader file and select the tar file in Odin as PDA. Next, confirm the start and wait until the device restarts again. Then turn it off again and plug the USB Jig in the Micro USB port. The S6 now boots into download mode. If everything worked, you should now be under Custom Binary Download and the entry should say NO. Now remove the USB Jig and reboot the phone.

Open Odin and reboot the device again as described above in the download mode. Then connect it to the computer, so that ID: COM in Odin lights up. Now unpack the downloaded firmware file (once). Select Odin PIT .pit the file in the PDA CODE? File in the PHONE MODEM? File and the CSC? MULTI-CSC? File. It may be that your firmware does not receive all four files. Simply assign the existing files to it.

Now start the flash process by clicking on Start and wait until it is finished with PASS. My Galaxy S6 is now back in its original condition by doing this.

So before you start with the rooting for 4.4.2 or 4.4.4 process, make sure that you always have the correct drivers installed. So both the drivers of your smartphone or table should be installed, as well as the ADB drivers. Find that by looking for the Android SDK. It also contains the required ADB drivers. After installing the drivers, you should check whether you have enabled USB debugging on the phone. If not, do this in in the developer options settings. (Also see the requirements of rooting Galaxy S6)

Now plug out the phone from the USB port of the computer for around 5 seconds, then push it back in. Now download the software and start it up. Afterwards it should be executing the menu item from the software.

The “ALLINONE” option makes the root patch in one go a completely. So hit it.

Now the Galaxy S6 root gets to the final stage. Open the toolkit, select the second root / unroot Option and then select the entry from the third ALLINONE, it automatically installs an alternative to the recovery so you can start installing custom ROMs and it also contains a hidden root tool for controlling root access on your mobile phone.

The toolkit provides you with two options to choose from in both the recovery, as well as in the root tool. You can choose out of the proven ClockworkMod Recovery or the more modern TWRP Touch Recovery, it’s all up to you, we’d like to choose for ClockWorkMod, so we can definitely recommend you to use that.

Also in Root Manager it is more a matter of taste whether to superuser or SuperSU, it really does not matter an awful lot, but we find the modern SuperSU better.

So back to the software, the Rootkit explained in detail what is to be selected in Odin3 of options.

The toolkit now starts the Odin3 tool to install the patched boot and recovery partitions and also shows you the same information on what to do. Read the text extremely carefully as always, if you do 1 thing wrong you might end up with a brick!

To better see how Odin3 will work, I suggest to take a look at a root 4.4.4 resource as you’ll be seeing what odin3 version to use. As there are several versions available. If you’re having any problems right now, then definitely check it out.

Turn off your Galaxy S6 and restart it in download mode.

Now pay attention to the fact that in Odin3 only the options Auto Reboot and F. Reset Time are checked. Also select under PDA from the directory root \ within the installation folder of the toolkit the file boot-insecure-dlk7-recovery-from N7100.tar. Make sure at this point that you please click on the “recovery” in the file name, there is this directory that contains an image file without this addition, which does not contain a recovery image.

Click on Start which leads the rooting process to be done in an automated way. The message will appear in the phone display between “Downloading … Do not turn of target !!”, take the warning seriously and please turn on the phone at this stage

in no circumstances otherwise, there is a risk that you will only be able to use your phone as a doorstop.

No Recovery?

If you have installed the recovery image by mistake, then take it as under 5 Flash Custom Recovery. Was again under PDA select the desired Recovery (we recommend TWRP), wait to start Odin3 and follow the instructions then again in the text of the Toolkit window. The image file recovery-TWRP- you will be able to find this time in recovery subfolder.

After restarting the phone, the critical part of the installation of the open bootloader and free recovery system is over and the toolkit automatically plays the one remaining components of the complete root patches. at the

End of the phone will again reboot.

In the App Drawer, you should now with SuperSU have an additional app to control root access, so that you can use in the future root apps like AdBlock or awall + on your mobile phone. In addition, you land from now on automatically powerful TWRP recovery mode when you turn the phone off and on via the key combination [Loud] + [Power] + [Home] again.
Custom ROMs make sense?

Away from the root privileges on the phone, it is available now free via TWRP a custom ROM for the S6 to install. On XDA Developers [5] is a list with more than 20 different ROMs for the device, including the classic

CyanogenMod is here – even if not in an unofficial version – represented.

Note, however, that you lack without Samsung’s own TouchWiz user interface one of the great pro points for the S6. Finally, the optimized for pen input and the two-window mode Samsung Apps to the appeal to the

Note devices. Search therefore better one of the TW-Based ROM from which to install based on TouchWiz other features in the S6-ROM.

We have rooting tutorials for everything and anything (see our section Root), here is a very simple root tutorial for the Galaxy S6 that can be done in just a few moments.

I remind you that we cannot be held responsible for any damage to the device. Obviously, the risks are very low but real.

Root the Galaxy S6 on PC, Mac and Linux:

Firstly do these prerequisites before you root.

– Make a backup.
– Download and unzip the archive signed by Chainfire:
– Put your smartphone into recovery mode: turn it off and then on again with these buttons pressed simultaneously: Volume Up + Volume Down + Power.
– Connect your smartphone to the computer via USB.


– Go to the unzipped folder.
– Run the root-file windows.bat

Mac OSX:

– Open a terminal, go to the unzipped folder.
– Type the command chmod + x
– Run the file


– Open an SSH window and go to the folder.
– Type the command chmod + x
– Run the file

And voila, your Samsung Galaxy S6 is Rooted!

Removing the root of Galaxy S6

– Make a backup of your device.
– Download and unzip the file system image of the Galaxy S6 previously reported in the adb folder.
– Run the flash file via a terminal all.bat.
– Once finished, select your Galaxy S6 Recovery Mode with the volume buttons and press the power button to confirm.
– Then select wipe data / factory reset option.
– Select Reboot now.

And now your Galaxy S6, is as fresh as an out of the box smartphone.